Garej Arwyn are an authorised Dinitrol treatment centre
Protect your vehicle from corrosion with a DINITROL® car rust proofing coating. Our professional OEM approved car underbody coatings provide the perfect car underseal solution by forming a tough ‘rubbery’ film resistant layer against stone-chips, gravel, road debris, road surface rain water and water ingress during harsh weather conditions. Car rust proofing is very common in Nordic countries and Northern European countries including: Switzerland, Austria, Germany, Poland and Holland due to their harsh winter conditions. However with the increased risk of flooding in the UK from freak weather storms and severe winters. Many car owners especially in rural areas are now looking to protect their cars by applying a rust proofing underbody coating. All new cars usually receive a car rust proofing underbody chassis coating during production or at import plants. But many people fail to realise that this coating should be inspected every year normally in the spring or summer months. To check that the car rust proofing coating layer is still providing adequate corrosion protection and the car underseal is not damaged in places allowing rain water to penetrate through. On average we recommend that a car should receive a fully renewed car rust proofing underbody coating every two years with an interim inspection every year to make sure any small holes in the corrosion protection coating layer are professionally assessed and repaired.
What’s the best car rust proofing solution
The products can be applied yourself with our convenient DINITROL aerosols or with an underbody coating gun and 1L DINITROL® shutz can range. However we recommend visiting a local affiliated DINITROL® treatment centre who will strip away your wheel arch covers and any plastic trays and coverings to ensure all cavities within the car underbody are completely coated. Along with applying the car rust proofing underbody coating to the chassis area the wheel-housings and side-skits are also covered. Also before starting the car underbody coating they will conduct an inspection of the car chassis and check for evidence of rusting and corrosion damage and can advise if any DINITROL® rust treatments or rust convertors should be applied prior to application.
For more information visit https://www.dinitroldirect.com/